LOCAL DASHBOARD

Overview

This web panel has been developed to connect FinestraMiner devices to the Wi-Fi network and display some diagnostic information.

Getting Started

1- Open the FinestraMiner Diagnostics App.

2- Make sure your FinestraMiner is connected to the internet.

3- Discover which local IP your FinestraMiner is running on by getting a Diagnostic Report from the FinestraDiagnostics App. (For example 192.168.1.93)

4- You can access the FinestraMiner web panel by putting: 8080 at the end of the IP you found in the search bar. (For example 192.168.1.93:8080)

Miner Name: In this field, type the unique Helium animal name from the Helium Explorer (don’t forget the hyphen between words, and please use lower case only!) belonging to your FinestraMiner.

Password: By default, your FinestraMiner’s password is “finestra”.

We strongly recommend changing your password after your first logging in.

Forgot Password: If you forgot your password, press and hold the button on the device for 10 seconds. Your password will be reset to “finestra”.

Diagnostic Report Screen

Inbound: “Inbound” lights up green if FinestraMiner is reachable. If the FinestraMiner cannot be reached, it lights up red.

Outbound: “Outbound” lights up green if FinestraMiner is successfully connected to the Internet. Otherwise, it lights up red.

Sync Status: This shows the sync status of FinestraMiner. If it is red, you can run Fast Sync.

Discovery Mode: Used to turn on FinestraMiner’s Bluetooth Discovery Mode. When you press the button, the blue light on FinestraMiner starts to blink.

Fast Sync: FinestraMiner starts Fast Sync when you press the Fast Sync button. Initiate fast sync for devices that fall far behind helium blocks.

Reboot: The reboot button is used to reboot FinestraMiner.

Network Settings Screen

Forget All Wi-Fi: This action will delete all saved Wi-Fi information. If the ethernet cable is not plugged in, the miner will not work properly. Also if the ethernet cable is not plugged in you can not access this interface.

Forget: This action will delete the last connected Wi-Fi networks. If the ethernet cable is not plugged in, the miner will not work properly. Also if the ethernet cable is not plugged in you can not access this interface.

Scan: Scans for available Wi-Fi in the area.

Available Wi-Fi Connections: Available Wi-Fi networks are listed here. Click on the Wi-Fi row you want to connect to.

Change Password Screen

Old Password: Input your old password.

New Password: Input your new password.

Menu

Diagnostic Report: Opens the “Diagnostic Report” screen.

Network Settings: Opens the “Network Settings” screen.

Change Password: Opens the “Change Password” screen.

Logout: It is used to log out of the session.